Let Your Vehicle Have The Last Word...
Show the World Your Passion
Show the World Your Passion
::FAQs::
Click on a question to show the answer.
1. Q: My vehicle does not have a keyless entry system - Is there a Motor Mouth® unit that will work with my vehicle?
A: For vehicles that do not have a keyless entry system, a Motor Mouth® unit with a remote system is being developed and should be out in the near future.
Back to Top
Back to Top
2. Q: My vehicle flashes once when I unlock it and twice when I lock it - Will the unit work on both lock and unlock?
A: Yes - You may want to set your unit to two flashes so that you can make it play on both lock and unlock. When your light flashes once on the unlock sequence, press key fob again to make light flash twice. If the light on the unlock sequence does not flash when you hit the key fob a second time, you will have to decide whether you want the Motor Mouth® unit to activate on the unlock or lock sequence and set the unit to the proper flash mode.
Back to Top
Back to Top
3. Q: When I lock and unlock my vehicle my lights flash twice. How do I set my unit to two flashes?
4. Q: How long is the warranty on my unit?
5. Q: Where can I purchase Motor Mouth® and Sound Modules?
A: To purchase the base unit or additional sounds, please click here or navigate to the "Sounds" page.
Back to Top
Back to Top
6. Q: Will Motor Mouth® work on my four wheeler or golf cart?
A: For vehicles that do not have a keyless entry system, a Motor Mouth® unit with a remote system is being developed and should be out in the near future.
Back to Top
Back to Top
7. Q: My unit does not work what do I need to do?
A: First - Make sure that all connections are properly secured and check the 2amp fuse that is on the red wire. If the fuse has blown, it will need to be replaced with a new 2amp fuse. Make sure that white wire is hooked up to the proper wire on light that flashes when key fob is activated. You can test your unit by touching the white wire once to the positive side of the battery (make sure the unit is set to one flash). Make sure that the speaker is plugged in and that the sound module is properly installed. If your Motor Mouth® unit still does not operate correctly, please contact customer service at customerservice@motormouthsounds.com.
Back to Top
Back to Top
8. Q: How do I set my Motor Mouth® Unit to play one sound?
9. Q: What other sounds do you have?
10. Q: Can I get customized sounds for my unit?
A: Antler Enterprises, Inc is currently making custom sounds for fleet vehicles or companies that want to advertise on their vehicles. Companies should contact us at customerservice@motormouthsounds.com.
Back to Top
Back to Top
11. Q: I own a store how can I get units to sell?
A: Please contact us at customerservice@motormouthsounds.com. We do have programs for retailers.
Back to Top
Back to Top
12. Q: Sometimes when I press my key fob multiple times my Motor Mouth® does not work.
A: Your Motor Mouth® unit is programmed to operate with one or two flashes. When you press your key fob to many times the software program signals the unit not to play. For example, if your unit is set for two flashes and you press your key fob three times this will shut down the unit.
Back to Top
Back to Top
13. Q: When I change my sound modules my unit will still only play one sound.
A: Please click here and refer to our installation instructions on our website. There is a section in the instructions that will guide your through setting your sound module to rotate through all four sounds.
Back to Top
Back to Top